Ductwork Installation Is No Simple Matter

Have you tried installing your duct by yourself? If you don’t have the know-how, don’t even think about it. Ductwork installation is a complicated job which, if not properly done, might lead to major problems in your heating and cooling system.

Air Leaks

As much as possible, curves should be minimized in your ducts. These can cause your unit to double its effort in giving your home the normal comfort that you need. Too many curves mean too many joints where air leaks happen most of the time. Installers use metal tapes and clamps to connect these joints and prevent air from leaking out. It’s important to keep the air tight to avoid wasted energy.

High Energy Bill

Expect a significant increase in your energy bill when your ducts are not properly installed. Aside from the air that’s leaking out through the holes, restricted air flow and incorrect sizing of ducts can also contribute to high energy consumption of your HVAC system. Qualified installers see to it that your ducts are complimentary to the size of your house and the kind of insulation you have.

Noisy Operation

If you failed to install your ductwork properly, you will be troubled by the rattling noises every time you run your system. These strange noises are probably caused by incorrect connection of the joints and lack of support to keep the duct in place while in use. You might be hearing some squealing sounds which are caused by unseen air holes and leaks.

Early Replacement

These problems mentioned above can lead to expensive repairs and shortened life period of your heating and cooling system. That’s why it’s a good decision to hire a professional HVAC technician to install your ductworks. A service cost is way lesser than repair and replacement expenses.

Expert Installation

Some homeowners prefer to have their ducts installed. However, it is still better to have it done or at least checked by professional experts. After all, your HVAC units are great investment that you don’t want to lose.

With decades of experience in HVAC system installation throughout Oklahoma City, our professional technicians at Rhino Heating and Air Conditioning understand the importance of proper installation and make sure that each component functions properly.

Mold: A Common HVAC Culprit

As we all know, large amount of mold is not good, be it on our health or to our HVAC units. They are one of the trickiest little culprits which affect the performance of your heating and cooling systems. Let’s talk more about this common HVAC culprit.

Spoiler alert: molds can be pretty dangerous, but Rhino can help!

Facts about Molds

Molds are common threats to HVAC systems. They thrive in moist places and grow in large populations within 48 hours. The common indication of mold build-up is musty odor. Although your units allow for continuous flow of air, there are still chances of mold growth in your evaporator coils and drip pans.

Don’t get us wrong, there are always small amounts of molds in your systems and in other parts of your house. It’s when mold population expands that they become a serious issue. They grow fast in corners with high humidity.

What are the effects of molds?

Molds can trigger allergy symptoms such as sneezing, itchy eyes, and cough. They can get into the system and join the air flow. They bring trouble when spread in the air inside your home and they can make you ill without even noticing them.  Toxic molds are dangerous types of molds which bring serious brain damage and death.

How can you fix mold problem?

Mold growth can be prevented with regular HVAC maintenance. That’s why it is necessary not to skip HVAC tune-up and cleaning. But since molds thrive in moist places, the best way to get rid of them is to control moisture inside your home.

Using humidifying and dehumidifying units is a smart way in controlling mold growth. Clean coils and drain pans as well. These parts could serve as breeding grounds for molds because condensation takes place in them when the air is dehumidified.

Replace air filters regularly. Dirt build-up on dampers can support mold increase. If your unit has noticeable signs of mold growth, don’t use the system. Hire a professional heating and cooling technician who is knowledgeable on HVAC jobs. Your certified local contractor can provide remediation on how to deal with mold growth.

Mold can be a serious problem to your HVAC systems. Let our experienced technicians at Rhino Heating and Air Conditioning deal with your mold problem and other HVAC issues.

Get Rid Of Those HVAC Noises

Do you hear strange noises coming out of your HVAC system whenever in use? There are normal sounds produced by your units in normal operations. However, if these sounds become irritating noises, that’s a completely different story. HVAC noises are signals that there are components in your system which needs quick fixing or repairs. Here are the common HVAC noises you should be familiar with.


Most of the time, the squealing noise is an indication of a belt or motor bearing problem. A broken belt is expensive to repair and may cause your blower to stop turning. If it’s the blower motor, adding lubricants will solve the noise issue. In some systems, sounds are produced during start up. You must be extra observant to know if it’s the normal sound or it’s already the noise produced by a faulty component.


You will hear banging noises when there are broken components or loose parts inside your system. This also happens when the indoor blower is unbalanced. When you hear loud banging whenever your blower is in use, shut it off and have a technician inspect the system for loose and disconnected parts.


Rattling sound is a sign of loose parts. Fans rattle when unfastened.  It can also be because of some debris blocking the system such as twigs and leaves. The first that you should do to prevent this noise is to check the system’s screws and bolts if loosed. Also, clean your condenser coils so that nothing can block the system’s operation and regularly change your air filters.


You can hear a normal clicking sound in your heating and cooling system when you start it up and shut it down. However, if the clicking is continuous, it’s no longer part of your normal HVAC operation. This could be an indication of a thermostat problem and some electrical concerns. Be sure to diagnose the problem immediately to prevent rise of major issues.


The buzzing sound in your unit can be an indication of loose parts such as fan blades, clogging in the indoor or outdoor unit and unbalanced blower. This could also mean that you have a dirty air filter and condenser coils or your refrigerants are leaking.

If you hear unusual sounds in your HVAC system, better turn it off and call a licensed technician right away. A good HVAC maintenance can help you cope with these unwanted noises.

Benefits Of Installing A Wi-Fi Thermostat

More and more homeowners are becoming wiser when it comes to monitoring their HVAC system use by shifting to wireless thermostats or the so-called, Wi-Fi thermostats.  For those who still wonder what the catch in using this innovation is, here’s a rundown of the benefits of choosing Wi-Fi thermostats.

Wireless thermostats are self-learning.

You don’t have to manually operate the system to adjust to the changing temperature. Your smart thermostat does all the hard work for you. It monitors the cooling patterns and can easily identify which zone needs adjustments. It provides recommendations on how to efficiently control your cooling system to ensure saving on your cooling bills.

Wi-Fi thermostats are easily controlled.

You can easily operate Wi-Fi thermostat using simple apps which feature remote access on you smartphones and tablets. You don’t have to get out of bed when you feel a sudden change in temperature. This tool will help you adjust the temperature in a hassle-free manner. Even if you are out of your house, your smart phones will let you make adjustments from anywhere.

It provides helpful reports.

Through your access in the apps, you will be able to receive reports on the status of your energy usage and some helpful recommendations on how you can save much on your energy consumption. In some types of Wi-Fi thermostats, you will be notified for possible system failure by sending maintenance reports. They also provide useful info on weather alteration and forecasts.

It cuts your cooling costs.

A wireless thermostat can detect the changing environment and make quick adjustments for your home. This will prevent you from getting wasted energy when the temperature suddenly drops or rises. This is a great advantage on your part especially when you are in the middle of your sleep or out of town.

Wi-Fi thermostat keeps an eye on your home.

You don’t have to worry about your house or apartment when you’re away. Your smart thermostat is like your window to your home and by simply accessing the app on your smartphone, you’ll be able to know if the heater’s working and at what temperature. With your Wi-Fi thermostat, keeping an eye to different properties is just a piece of cake.

You might be wondering why there are increasing numbers of homeowners who opt for Wi-Fi thermostats for their home. With these amazing benefits, it just proves that they made the right choice.  Don’t be the last to experience great convenience and savings with this new innovation.

When Is The Best Time To Buy An Air Conditioning System?

The best time to shop for an air conditioning unit is during its off seasons. Fall and spring will give you the best deal for these products since the demand is at the lowest points. Although most people think that winter will give them god bargains, there are still better reasons why you should shop during seasons in between.

Why not on winter?

Winter is also a good time to buy an AC unit. However, HVAC companies are also in demand for heating services and furnace repairs. Homeowners would prefer having their AC done during scheduled furnace repairs with their HVAC contractor. A heating and cooling service package costs lesser than having your AC and furnace done at different schedules.

So basically, heating and cooling business is just as in demand as summer during the winter season.

Why shop during spring and fall?

The fair weather of spring and fall does not bring good news to the heating and cooling industry. Since these seasons call for more outdoor hangouts and enjoyments, people spend more time outside their homes. The beautiful weather also reduces the use of air conditioners or furnaces and it’s like these systems are on vacation time.

Many HVAC stores and contractors offer big discounts and great deals just to get their products sold during these periods. Due to low demand, they use strategies to get their stock out such as lowering the prices and providing bonus offers in their services. Here’s why it’s a good idea to shop during these times of the year:

  1. With fewer demand in the market, professionals have more time in helping you choose the air conditioning system that fits your home. Aside from getting them at low costs, you can guarantee that the AC is installed correctly.
  2. Installing AC during fall or spring seasons gives you time to do your research as to what type of unit should you buy. You can even hire professionals to evaluate your home to avoid mistakes in purchasing.
  3. Since you will not be using your unit right away, you are free to install it anytime on an ideal weather. In case there are system errors, you can provide solution ahead of time.

It is not just buying the right AC unit that will give you amazing savings. Buying at the right time can also cut your investment cost. At Rhino, we provide great deals for your heating and cooling needs for all seasons.

Why Is Your AC Blowing Warm Air

While cool drinks and beach parties are great ways to enjoy the season, home comfort is still the best companion to ease the heat.  That’s when we need our air conditioning systems so badly.

One of the most common HVAC problems during the summer season is the warm air produced by air conditioning systems. It’s a big discomfort since this is the time when we rely too much on our units to cool our homes. Most homeowners are stressed out thinking what to do about it. Here we’ve outlined some reasons why your AC is having trouble producing cool air.

The thermostat is on heat mode.

Check if you have accidentally switched your thermostat to “heat” mode. It happens all the time. Flip the thermostat setting back to cool and see if it makes a difference. You should also check if the batteries are still working and if not, replace them immediately.

You have a dirty air filter.

Dirty air filters can lead to dirty evaporator coil. Dust and debris can block the evaporator coil and may also freeze it. You might think that it can add up to the cool air produced but you’re wrong. It actually does the opposite. Frozen evaporator coils obstruct the flow of cool air allowing the warm air of the running motor to circulate your home. Clean your AC filter regularly. Hire a technician to see the cause of your frozen evaporator coil. If it’s not dirt, you might have another problem in your system.

Your outside unit is in poor maintenance.

If you already checked the indoor parts and found no error there, walk out of your house and inspect the outdoor parts. Your condenser coils can be blocked by dust and leaves if not properly maintained reducing free airflow. If you have plants near the unit, be sure to trim them often to avoid growing near the condenser coils. Do a regular cleaning to rinse off dust in the unit.

You’ve got low refrigerant.

The usual cause of warm air produced by AC unit is low refrigerant which is usually Freon. The refrigerants cool your home. If you notice ice formation inside and out of your system, AC blowing warm air, or strange noise, you might have a problem with your refrigerant. It may be overcharged, undercharged, or leaking. This is a complex job so better hire a licensed technician to fix the issue.

Do not compromise your comfort and start doing preventive maintenance for your system. You can always count on the experts at Rhino Heating and Air Conditioning. Call us at 405-615-2676.

How To Improve Your IAQ? Breathe Easy With These 6 Tips

Pollens and dust and many other indoor air pollutants can put yours and your family’s health at risk. It’s time to be smart about the air you and your family breathe.  Breathe easy with 6 easy ways to improve your home’s Indoor Air Quality (IAQ).

  1. Use a vacuum cleaner.

The simplest way to get rid of airborne particles in your home is vacuum cleaning. There are dust particles which cannot be removed by simply sweeping the floor. Vacuums suck dust particles found in your carpet and other furniture and prevent them from spreading all around the house.

  1. Maximize air circulation.

During fair weathers, turn your fan on and open windows to allow the circulation of air. The movement of air may remove indoor pollutants. Another option to maximize airflow is to use air purifiers.

  1. Control moisture in your home.

Choose air conditioners with humidifiers to maintain humidity in your place. Wet corner can be a possible place for molds and mites. These particles may circulate all over the house and can cause allergies and respiratory problems.

  1. Reduce the use of toxic chemicals.

Use milder chemicals when cleaning your house. You can use cleaning solutions like water and vinegar to clean corners and windows instead of toxic chemicals like ammonia and bleaches. When buying paints and adhesive removers, it’s best to purchase in small amounts because they can also pollute the air in your home even when sealed.

  1. Keep your bedroom allergen-free.

There are pillow covers and mattresses designed to keep your bedroom free from dust and other allergens. Be sure to wash your bed sheet weekly and better dry in high heat, too.

  1. Do regular home maintenance.

Consider a weekly schedule of general cleaning in your home. Just like your HVAC system, your home needs frequent cleaning to remove dust particles and other air pollutants. It will not just maintain the air quality, but the entire home condition as well.

These tips are all you need to be smart about your indoor air quality.

HVAC Basics

Just like other forms of shopping, buying a new HVAC system can get pretty daunting. However, with an educated mind, rest assured that you’ll end up with a good choice. To make your buying process comfortable and success, you must be familiar with your heating and cooling systems. Today we’ll walk you through the HVAC basics to assist you in getting the right HVAC unit for your comfort needs.

HVAC Systems

The adage ‘one size fits all’ does not apply to your HVAC system, too. Simply put, not every unit you see in the marketplace makes a good choice for you. On this note, it’s best to tap a professional HVAC specialist to help you find the right system for your home.

Split Units

Split units are installed both in and out of your home, and are ideally energy-efficient. They are considered as stylish solutions conforming to every interior space and lifestyle. These models offer lower costs and environmental impact.

Communicating Systems

You can now have a better control of your comfort. Thanks to communicating systems. The best thing about communicating systems is that they offer a superior level of automation with efficiency and convenience all throughout its lifespan.

Ductless Units

If you need a reliable and flexible system for your home, a ductless system is for you. Ductless systems are an ideal choice for homeowners who need the same level of comfort and at the same time ideal for areas where ductwork isn’t an option.

Geothermal Systems

Geothermal systems tap the energy from the Earth and use it to our advantage. These systems are energy efficient and are obviously environmental friendly.

Packaged Units

As the name implies, packaged units are everything you need in a single package. It is a single-cabinet unit containing all your HVAC needs.

Knowing these HVAC basics helps you find the right heating and cooling system you need. For more assistance, don’t hesitate to call a pro at Rhino Heating And Air.

5 Common AC Condenser Problems

Ideally, an AC condenser repair includes changing or repairing one or more parts of the unit. While some minor condenser issues can be fixed the DIY way, other problems call for a professional HVAC specialist. Here are 5 common problems that your AC condenser may encounter.

  1. Leaks

Condenser failure can be caused by leaks within seals and faulty tubes. The tubes can get pinched or may suffer from wear and break especially after extensive usage. Tap a professional contractor to resolve leak issues.

  1. Blockage

Over time, your AC unit can get blocked by debris and other unwanted particles, which can lead to condenser failure. While some of these particle could be external, it’s oftentimes due to metal particles that punctured the condenser itself. Proper maintenance can help homeowners prevent this problem.

  1. Dirty Component

Since most residential air conditioner components are mounted outdoor, it’s not surprising for the condenser or other parts to get dirty. The outdoor components attract dirt and debris, while brush, grass, and other vegetation matter grow around the system preventing it to work properly. Be sure to check the outdoor component and make sure it’s clean.

  1. Faulty Run Capacitor

The job of the AC condenser’s run capacitors is to provide energy for the fan motors to operate. If the run capacitor is in bad shape, don’t be surprised if it won’t start the motor.  If you think that your run capacitors have gone bad, call your local HVAC technician for proper diagnosis and repair.

  1. Damaged Coil

One of the worst AC condenser problems you may encounter is having a damaged coil. This could be due to several reasons such as corrosion, impact and debris. Damage coil has to be addressed by a professional HVAC specialist.

These are just 5 of the common problems your AC condenser may experience. Spare yourself from the headache caused by these problems by calling a trusted HVAC professional.

5 Common AC Problems That Call For Professional Repair in Moore, OK

Is your AC unit letting you down during the hottest days of summer? There’s something wrong with your unit! To ensure that your unit is working properly, you should give it a visual check regularly. Here are 5 common problems that call for air conditioning service and repair in Moore, OK.

         1.  Noisy Operation

A loud noise created by your air conditioner can distract you and the other people around. The problem could be the displaced fan belt inside the unit. While it may not be a serious problem, it’s always a good idea to call for a professional conditioning service and repair. A certified tech in Moore, OK can do a safe and efficient job to resolve the problem.

         2.  Your Unit Is No Longer Releasing Cold Air

Is the air that comes out of your air conditioner no longer enough to keep your comfortable? It is likely that there’s something going wrong inside your unit. Checking your system helps you detect the problem. Call a trusted HVAC contractor in Moore to check the parts and identify the main issue.

         3.  Ice Formation inside Your Unit

Proper maintenance of your AC is necessary because it can contribute to the formation of ice inside the unit. You need to pay attention to the unit’s filter to avoid dirt and blockage. This problem can be easily resolved by a certified HVAC technician.

        4.   Refrigerant Leakage

A leaking refrigerant may also affect your AC. It may be dangerous to purchase a refrigerant that is not compatible to your air conditioner. Your local HVAC contractor can check your AC system and recommend the best solution for the problem. A leaking refrigerant can cause harm to the environment, so it must not be taken for granted.

         5.   Bad Smell

Bad smell from your AC is possibly caused by the whiff outside which is carried through the unit. It may also be caused by dead animals that are hidden somewhere else. The blocked dirt can also contribute to the growth of fungi. To address bad smell issue of your air conditioning unit, it’s always best to hire a professional HVAC technician.

Even simple problems of your air conditioning unit should not be taken for granted. Ignoring the failing performance your AC unit can lead to irreversible regression later. If you notice that there’s something wrong with your air conditioner, don’t hesitate to call a local HVAC contractor in Moore, OK.

Contact Rhino Heating and Air for a reliable AC repair & service.